质量工作通报
Quality Inspection Report
（第11期）
11th version
山东长兴集团公司品管部 2024年5月6日
QC department, Shandong Changxing Group May 6, 2024
4月份质量奖惩通报
April Quality Rewards and Punishments Notice
嘉 奖：
Reward
部 门 depart | 姓 名 name | 嘉奖内容 content | 奖 励 reward | 备 注 note |
电焊 Welding | 李亮 | 发现外协刀台顶丝块焊接倾斜，避免问题流转下道工序 It is found that the welding tilt of the top wire block of the external tool table avoids the problem flow to the next process | 30元 30 Yuan | |
李桂伟 | 外协一体式水槽漏水，造成返修整改 External cooperation integrated sink leakage, resulting in repair and rectification | 20元 20 Yuan | 40分钟 40min | |
装配 Assemble | 李桂明 Li guiming | 外购空调不制冷，造成拆卸整改 The purchased air conditioner does not cool, resulting in disassembly and rectification | 15元 15 Yuan | 0.5小时 0.5hour |
外购0.75减速电机不转，造成排查拆卸整改 Purchased 0.75 gear motor does not turn, resulting in investigation, disassembly and rectification | 30元 30 Yuan | 1小时 1hour | ||
李淑恒 | 30元 30 Yuan | 1小时 1hour | ||
外购0.75减速电机漏油，造成拆卸整改 The purchased 0.75 gear motor leaked oil, causing disassembly and rectification | 30元 30 Yuan | 1小时 1hour | ||
高庆洪 Gao Qinghong | 外协滑道侧边丝孔打错方向，造成拆卸整改 The wire holes on the side of the external guide rails are in the wrong direction, causing disassembly and rectification | 15元 15 Yuan | 0.5小时 0.5hour | |
电工 electric | 王军 Wangjun | 外购空调不制冷，造成拆卸整改 The purchased air conditioner does not cool, resulting in disassembly and rectification | 15元 15 Yuan | 0.5小时 0.5hour |
外购0.75减速电机不转，造成排查拆卸整改 Purchased 0.75 gear motor does not turn, resulting in investigation, disassembly and rectification | 15元 15 Yuan | 0.5小时 0.5hour | ||
吕中智 Lvzhongzhi | 30元 30 Yuan | 1小时 1hour |
考 核
Punishment:
部 门 Department | 姓名 | 考核内容 content | 考 核 Punishment | 备 注 note |
仓储部 Storage | 李翠翠 | 发货连杆尺寸错误，造成补发替换 Delivery connecting rod size error, resulting in replacement | 100元 100 Yuan | |
生产装配 Assemble | 李淑恒 Li Shuhuan | 55元 55 Yuan | ||
李桂明 | 放板机固定螺栓未紧住，造成返修整改 The fixing bolt of the plate laying machine is not tight, resulting in repair and rectification | 50元 50 Yuan | ||
黄庆伟 Huang qingwei | 20元 50 Yuan | |||
生产机加 mechanical | 李桂伟 Li Guiwei | C2机架焊接三角板焊接外观差，焊接不均匀 C2 frame welded triangle plate welding appearance is poor, uneven welding | 50元 50 Yuan | |
杨凤强 Yang Feng Qiang | 成品入库，归正前支撑角铁漏喷漆 The finished product was put into storage, and the support Angle iron was sprayed before correction | 50元 50 Yuan | ||
维保部 Maintenance | 时立光 Shi liguang | 维保机入库，刀顶丝及排屑顶丝无，排屑螺栓未固定，正齿错位，造成返修整改 When the maintenance machine is put into storage, the top wire of the knife and the top wire of the chip removal are not found, the bolt of the chip removal is not fixed, and the orthotooth is misplaced, resulting in repair and rectification | 50元 50 Yuan | |
采购部 Procurement
| 陈静 Chen jing | 市场反馈放板机电箱控制问题，对接不及时造成市场影响 The market feedback on the control problem of the electric box of the release board machine, and the market impact is caused by the delay in docking | 100元 100 Yuan | |
王磊 Wang lei | 50元 50 Yuan
|
编 制：品管部 审 核： 批 准：
Compiled by: QC depart Reviewed by: Approved by:
